Before using the OneTouch UltraMini® meter to test your blood glucose, carefully read the User Guide and inserts that come with the components of the system.
How do I turn on the OneTouch UltraMini® meter?
To perform a test, insert a test strip as far as it will go. The display will turn on and the meter will briefly perform system checks.
To view past results, start with the meter off, then press and release ∨.
Every time you turn your meter on, a start-up screen will appear for two seconds. All segments of the display should appear briefly on the start-up test screen to tell you that the meter is working properly. See the Getting to Know Your System Section of your User Guide for an example of what the screen should look like.
If the meter does not power on, try changing the meter battery.
CAUTION: If any information is missing from the start-up test screen, there may be a problem with the meter. Call Customer Service.
What battery do I use with the OneTouch UltraMini® meter?
Your OneTouch UltraMini® Meter uses one 3.0 Volt CR 2032 lithium battery (or equivalent). Your meter comes with the battery already installed.
How many results will the OneTouch UltraMini® meter store and where can I view past results?
The meter stores your most recent 500-blood glucose test results and displays them in the order the tests were taken.
If your meter is off, press and release ∨ to turn it on. After the start-up test screen, your most recent test result will appear on the display. “M” also appears to indicate memory mode.
If you have just completed a test, leave the test strip in the meter and press ∨ to enter the memory mode.
Press ∨ to move to the previous result stored in the meter. Then, press ∧ or ∨ to move forward or backward through all of your results. See your User Guide for complete instructions.